Replacement Parts; Accessories - Cole Parmer FSB-200 Series Instruction Manual

Fluidised sand bath

Hide thumbs Also See for FSB-200 Series:

Instruction manual (12 pages)

Instruction manual (36 pages)

Table Of Contents

Table of Contents

The following parts may be purchased if replacements are required:

Part number

7001560

7001665

Brown/ALO

The following accessories are available for use with the FSB-200-5I and FSB-200-12I.

Sample basket

The steel mesh sample basket safely holds samples away from the heating elements of the ﬂuidised bath

and assists retrieval of items from the bath.

Product code

FA624

FA625

7031658

7031659

Extraction collar

The extraction collar is used with the deep baskets and allows ducting to be connected for fume extraction

away from the bath.

Product code

F6157

Lid

Lids are a vital part of the fluidisation process to contain the aluminium oxide and retain heat. They are

designed to allow airﬂow into the top of the bath and allow clean air to be drawn into the bath and

through the exhaust duct when connected to an extraction system. The FSB-200-5I and FSB-200-12I have an

insulated lid.

Product code

F6156

Air pressure regulator and ﬁlter

Antylia Scientific Ltd can supply a ﬁlter/regulator assembly for compressed air which is not

moisture or oil-free.

Product code

F5915

CN-100 Cyclone and Collection bin

An efﬁcient wall mounted unit which can extract all the aluminium oxide carried over into the Fluidised

Sand Bath exhaust system when the extraction fan is in operation. The cyclone collection bin allows

escaped aluminium oxide to be collected and re-used. An extraction fan and cyclone are recommended

unless a suitable extraction hood or fume extraction system is already in place.

Product code

FSCN1

Extraction Fan

Powerful 380/415V, 3 phase fan delivering an extraction rate of 250CFM (425m³/hr).

Product code

F5243

F5243-60Hz