Description Of Components And Front Panel Controls - Cole Parmer FSB-200 Series Instruction Manual

DESCRIPTION OF COMPONENTS AND FRONT PANEL
Figure 1: Components and controls – FSB-200-5I shown
Item Description
1 Fluidised bath chamber
2 Operating instructions
Eurotherm 3216
3
temperature controller
4 Power indicator (green)
5 Heater indicator (amber)
6 Air flow table
7 Flow meter
8 Air flow valve
9 Fuses
10 Rating plate
11 Mains power cord
12 Compressed air inlet
CONTROLS
Function
Heated chamber containing the fluidised aluminium oxide.
Quick operating guide.
Used to set the required bath set point temperature. The
control parameters have been factory pre-set.
Lights green when there is mains power to the unit.
Lights amber when the heaters are on. Will flash on and off
when the bath is at set temperature.
Indicates approximate air flow according to temperature.
A float indicates the fluidisation air pressure set by the control
valve. The flow rate indicated by the float in the tube is on a
scale of 0.5 to 4.0 CFM (cubic feet per minute).
Controls the amount of air for fluidising the bed.
The unit is fitted with 2 x 25A (FSB-200-5I) or 2 x 30A
(FSB-200-12I) fuses Details the model number, serial number
and power rating. Connect to mains power supply.
The air supply should be connected via suitable flexible hose.
18