Panasonic PT-VZ470U Operating Instructions Manual page 24

Bottom
r

Projection direction
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
Power <v/b> button (v standby/b power on)
1
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
24 - ENGLISH
Chapter 1 Preparation — About your projector
r
6
11
Top
14 15
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
6 <MENU> button
Displays or hides the main menu. (x page 48)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (x page 43)
9 asqw buttons
Navigates the menu screen.
Adjusts the volume level (qw).
10 <AUTO SETUP> button
Automatically adjusts the image display position while
projecting the image. (x page 42)
16