Cleaning The Scanner Glass; Saving Power; Saving Power - Control Panel - Epson XP-343 Series User Manual

Table of Contents

User's Guide

Related Information

"Loading Paper in the Rear Paper Feed" on page 35

Cleaning the Scanner Glass

When the copies or scanned images are smeared or scuffed, clean the scanner glass.

Important:

Never use alcohol or thinner to clean the printer. These chemicals can damage the printer.

1. Open the document cover.

2. Use a soft, dry, clean cloth to clean the surface of the scanner glass.

Note:

❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner

and a soft cloth to remove it. Wipe off all remaining liquid.

❏ Do not press the glass surface too hard.

❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.

The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can

adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please

consider the environment before making any change.

1. Enter Setup from the home screen using the

2. Select Printer Setup using the

3. Select Power Off Timer or Sleep Timer using the

Maintaining the Printer

button, and then press the OK button.

Table of Contents

Xp-342 series Xp-345 series