Polygroup TG76CH092C10 Quick Start Manual

Carefully review all instructions. If you have a problem, call or email the
manufacturer. Tree Warranty is Valid through December 31, 2022.
Email: warranty@polygroup.com
Phone: +1 (888) 919-0070

WARNING:

To reduce the risk of fire and electric shock:
a) Do not add any light strings or other power supplies other than what has been provided with this product.
b) Do not mount or support strings in a manner that can cut or damage wire insulation.
c) Do not use near candles, heaters, or other similar sources of heat.
d) Do not use candles on tree.
e) Do not use near tubs, sinks, or other wet areas.
f ) Artificial trees are made from small fibers that may pose a choking hazard if detached from the branches.Use care around
children and pets.

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from Polygroup®!
This tree comes with Quick Set® technology - allowing you to set up your tree and light it up in minutes!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
Ensure all packaging is removed before assembly and use. Keep tree's light sets unplugged from power before beginning assembly.
Ensure final assembly is upright and stable.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into
the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
Tree top
Section 2
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Page 1 of 2
FL15 7.5FT PRE-LIT WHITE FLOCKED TREE
TG76CH092C10
MODEL # :
SKU # : 124331167
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
*Electrical Rating For The Tree
(For Indoor Use Only)
2.38A 120V 60Hz
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Insert
Outlet