Polygroup Home Heritage TG70CH119P00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
technology - it takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to quickly and easily set up your new tree:
1. Choose a level surface near a wall outlet.
2. Assemble the tree stand (See Fig. A).
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 2
Section 1
3. Identify all tree sections (See Fig. B) by the stickers on them, and start assembling from bottom to top.
4. Open the protective cap of pole, and insert the pole into the stand. Allow all branches fall down into
place. Check to make sure that all wires are free from branch hinges.
5. Shape the tree section one branch at a time. Start with the tips closest to the pole and move outwards.
Fan all the tips out in alternating directions, and slightly upsweep them for a natural look (See Fig. C).
Fig. C
Top view
6. Repeat Step 4 and 5 for the upper tree section(s) until tree top is installed and shaped.
7. Connect plug with adaptor, and plug it in to the wall outlet as indicated in Fig. B.
8. Step back and view your tree. Shift branches to fill any gaps. Your Christmas tree is now ready to be
decorated.
MODEL #: TG70CH119P00
Polygroup®!
Click
Tree Top
Side view
This tree comes with Quick Set®
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.83A
Output: 24V DC 2A
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Plug Adaptor
Into Wall
Insert Green Label
Plug into Adaptor
1
Outlet