Table of Contents
Advertisement
(8) Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output.
connector power up the system when a wake up signal is received through the LAN
card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(9)
FAN Speed Headers (3-pin) : SYSFAN1, SYSFAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan
manufacturer, the wire and plug may be different. The red wire should be positive, while
the black should be ground. Connect the fan's plug to the board taking into consideration
the polarity of connector.
SPEAK
JW_FP
Pin 1
Pin 1
System Case Connections
WOL
1
3
Wake-On-LAN Headers
1
3
CPUFAN
1
3
SYSFAN2
FAN Headers
15
1
3
SYSFAN1
This
Advertisement
Table of Contents
