Zibro SC3125 kids Installation Manual page 76

Available languages

Drain joint installation

(see fig. 14)

Fit the seal into the drain elbow, then insert the drain joint into the base pan hole in the bottom of the out-

door unit, rotate 90° to assemble them securely. Connect the drain joint with an extension drain hose (not

included). In this way condensed water, which is produced during heating mode of the airconditioner, can

be drained away.

Seal

Drain joint

Fig. 14

< 20

≥ 20

REFRIGERANT PIPING CONNECTION

ATTENTION

All refrigerant work and refrigerant piping should comply with the local legislation, standards

and codes and should only be done by qualified and skilled people.

CAUTION

For your safety, always wear safety eye wear and work gloves when connecting the pipes.

Base pan hole of

outdoor unit

Seal

Drain pipe

The last 20 cm of the

refrigerant pipe, close to

the connector must be

kept straight. Bending can

cause leakage and is not

covered by the warranty.

Fig. 15