Nylon Cutting Head - Makita UR012GT201 Instruction Manual

For the chisel and shredder blade, mount them as
illustrated.
Chisel blade
Shredder blade
3. Put the clamp washer onto the cutter blade and
then tighten the nut securely by the box wrench.
1
► 1 . Box wrench 2. Hex wrench 3. Loosen 4. Tighten
NOTE: Tightening torque : 20 - 30 N•m
4. Remove the hex wrench from the gear case.
To remove the cutter blade, follow the installation proce-
dures in reverse.
4
3

Nylon cutting head

NOTICE:
Be sure to use genuine Makita nylon
cutting head.
2
► 1 . Nylon cutting head 2. Spindle 3. Hex wrench
4. Loosen 5. Tighten
1. Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
2. Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3. Remove the hex wrench from the gear case.
To remove the nylon cutting head, follow the installation
procedures in reverse.
Plastic blade
NOTICE:
Be sure to use genuine Makita plastic
blade.
2
► 1 . Plastic blade 2. Spindle 3. Hex wrench 4. Loosen
5. Tighten
1. Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
2. Place the plastic blade onto the spindle and
tighten it securely by hand.
3. Remove the hex wrench from the gear case.
To remove the plastic blade, follow the installation pro-
cedures in reverse.
17 ENGLISH
4
5
4
5
2
1
3
1
3