Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the footcaps as required to ensure that the item stands in a rigid position.
Warranty LIMITED WARRANTY-Continued • Straps and/or wicker. Straps and/or wicker weave (if applicable) are warranted against separation and tearing for one year from purchase date. Fading and/or discoloration resulting from exposure to the elements, oils, spills, fluids, chemicals, or any other cause is not covered. •...
Page 5
Care and Maintenance FRAMES Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products. Rinse with clean water and dry thoroughly. Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames.
Pre-Assembly PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective materials before beginning assembly. It takes about 10 minutes for two people to complete all the assembly. OBSERVE WEIGHT LIMITS The recommended weight limits for the following products are listed below: Bench:250lbs CAUTION:If you overload your furniture, injuries can occur.
Pre-Assembly(continued) Package Contents QUANTITY PART DESCRIPTION CHAIR FRAME LEG-1 MIDDLE LEG LEG-2 Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER.
Assembly Instructions Attaching the leg to the chair frame Attach the chair frame (A) to the leg-1 (B) by using the bolt (E) and washer (F). Repeat procedure for the middle leg (C) and leg-2 (D). Use the hex bolt driver (H) to tighten all bolts. Cover all bolts with covers (G).
Customer Service CUSTOMER SERVICE DEPT: 1337 TAYLOR FARM ROAD, SUITE 100, VIRGINIA BEACH, VA 23453-3142 FAX: (757) 368-0576 CUSTOMER SERVICE NOT LINE:1-800-416-3511 SERVICE HOUSE: MONDAY-FRIDAY 9:00AM-5:00PM (EASTERN TIME) E-MAIL: customerservice@va-cs.com...
Page 10
Please refer to part numbers when reordering For questions or comments about product: Email: www.agio-usa.com or Call toll-free: 1-800-416-3511...
Need help?
Do you have a question about the D71 M20321 and is the answer not in the manual?
Questions and answers