Module Jig Tuning Concept; Rf Testing And Rf/Bb Tuning Concept - Nokia RM-70 Service Manual

RM-70
Service Tools and Service Concepts

Module jig tuning concept

RF testing and RF/BB tuning concept

Note: Do not connect an ACP-charger to the phone! This may damage the FEM module.
Note: It is important that the FBUS connection (controlled by Phoenix) is active. In case of more or
another connection, the phone will not start up when placing it into the jig. In this case, the DAU-9S
cable must be disconnected for a couple of seconds, then reconnected and the phone powers up
again.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Nokia Customer Care
Page 4 –15