Nokia RM-70 Service Manual page 82

Nokia Customer Care
Page 4 –10
RJ-93
RJ-93 is used as a rework jig for the engine module.
This stencil takes the front end module (FEM) or power amplifier (PA)
module for spreading the soldering paste to the component. Must be
used together with the ST-40 stencil.
SA-76
The SA-76 coupler is for GSM RF testing.
The RF antenna coupler for use with interface adapter SS-62 extends
CU-4/SS-62/FS-9 set-up to allow RF function tests in GSM bands 900,
1800 and 1900 MHz.
SA-76 is not suitable for RF tuning.
Note: When using the Coupler the phone shall be used in
open mode.
SS-42
SS-42 is used to remove the camera out of its socket.
SS-45
The front camera removal tool SS-45 is used to remove/attach the
front camera module from/to the socket.
SS-46
SS-46 acts as an interface adapter between a product-specific flash
adapter and FPS-10.
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Service Tools and Service Concepts
Rework jig
RF coupler
Camera tool
Front camera
removal tool
Interface adapter
RM-70
Issue 1