Nokia RM-70 Service Manual page 53

RM-70
Service Software Instructions
3. Read the disclaimer text carefully and click Yes.
4. Choose the destination folder.
The default folder
5. To continue, click Next.
To choose another location, click Browse (not recommended).
6. Wait for the components to be copied.
The progress of the installation is shown in the
7. Wait for the drivers to be installed and updated.
The process may take several minutes to complete.
If the operating system does not require rebooting, the PC components are registered right away.
If the operating system requires restarting your computer, the Install Shield Wizard will notifies about it.
Select Yes... to reboot the PC immediately or No... to reboot the PC manually afterwards.
After the reboot, all components are registered.
Phoenix does not work, if the components have not been registered.
Note:
Issue 1
Figure 7 Disclaimer text
C:\ProgramFiles\Nokia\Phoenix is recommended.
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Setup Status window.
Nokia Customer Care
Page 3 –7