Table of Contents
Advertisement
AXIS M31 Network Camera Series
The device interface
System
Date and time
The time format depends on the web browser's language settings.
Note
We recommend you to synchronize the device's date and time with an NTP server.
Synchronization: Select an option for synchronizing the device's date and time.
• Automatic date and time (NTP server using DHCP): Synchronize with the NTP server connected to the DHCP server.
• Automatic date and time (manual NTP server): Synchronize with NTP servers of your choice.
-
• Custom date and time: Manually set the date and time. Click Get from system to fetch the date and time settings
once from your computer or mobile device.
Time zone: Select which time zone to use. Time will be automatically adjusted for daylight saving time and standard time.
Note
The system uses the date and time settings in all recordings, logs and system settings.
Network
IPv4 and IPv6
IPv4
• Automatic IP (DHCP) and DNS (DHCP): The recommended setting for most networks. The current settings are
updated automatically.
• Automatic IP (DHCP) and manual DNS: Contact your network administrator to configure the manual settings. The
current automatic settings are updated automatically.
• Manual IP and DNS: Contact your network administrator to configure the settings.
IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks,
provided that each address is unique. To avoid conflicts, we recommend you to contact your network administrator before you
assign a static IP address.
Subnet mask: Enter the subnet mask.
Router: Enter the IP address of the default router (gateway) used to connect devices that are attached to different networks and
network segments.
Hostname: Enter the hostname.
Search domains: When you use a hostname that is not fully qualified, click Add search domain and enter a domain in which to
search for the hostname used by the device.
DNS servers: Click Add DNS server and enter the IP address of the primary DNS server. This provides the translation of hostnames
to IP addresses on your network.
IPv6
Assign IPv6 automatically: Select to let the network router assign an IP address to the device automatically.
HTTP and HTTPS
Primary NTP server and Secondary NTP server: Enter the IP address of one or two NTP servers. When you use
two NTP servers, the device synchronizes and adapts its time based on input from both.
32
Advertisement
Table of Contents
