Table of Contents
Advertisement
AXIS M31 Network Camera Series
Configure your device
7. Set the postbuffer time to 60 seconds.
8. Click Save.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Click
2. Go to System > Detectors > Camera tampering.
3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
4. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
Add a recipient:
5. Go to System > Events > Recipients and click Add recipient.
6. Type a name for the recipient.
7. Select Email.
8. Type an email address to send the email to.
9. The camera doesn't have it's own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
10. To send a test email, click Test.
11. Click Save.
Create a rule:
12. Go to System > Events > Rules and click Add a rule.
13. Type a name for the rule.
14. In the list of conditions, select Tampering.
15. In the list of actions, select Send notification to email.
16. Select a recipient from the list.
17. Type a subject and a message for the email.
18. Click Save.
Applications
Applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.
To find the user manuals for Axis applications, go to axis.com.
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
and select Legacy device interface.
17
Advertisement
Table of Contents
