Impact on warranty Impact on warranty Repainting made on this product, which are not approved by Axis Communications AB, will void Axis product warranty. Thus, Axis Communications AB only warrants the Axis product in its original form. If repainting nevertheless is made, the following conditions and instructions are recommended: •...
AXIS M31 Series How to repaint the product How to repaint the product Disassembly 1. Remove the pan cover, the bottom cover, and the mounting bracket from the camera unit. 2. Remove the cable lid from the bottom cover. Pan cover...
For all variants though, proper cleaning to remove oil, grease and dust is strongly recommended. For information about which materials are used in the product, see the datasheet available at www.axis.com Powder coated parts - Using very fine sandpaper (P240), remove the original powder coating down to the stainless steel surface and clean the parts before painting, or use primer.
Page 5
AXIS M31 Series How to repaint the product Pan cover Camera unit Bottom cover Mounting bracket Cable lid...