Aruba Networks AP-90 Series Installation Manual page 3

3. Connect the ethernet cable to the ethernet port (ENET) on the back of the AP.
4. Secure the AP to the mounting bracket by aligning the mounting holes on the back the AP with the
mounting post on the bracket.
5. Push the AP against the posts and downward until the posts engage the slots at the top of the mounting
holes. See
Figure 4 Completing the Installation (Wall Mount Bracket)
Figure 5 Completed Installation
AP-90-MNT-W2 | Installation Guide
Figure 4 and Figure 8 for more details.
AP in Wall Mount Bracket
3