Chapter 4: Configuration; Accessing The Management Application - Black Box ACR1000-CPH8R-R2 User Manual

CHAPTER 4: CONFIGURATION

4.1. ACCESSING THE MANAGEMENT APPLICATION

Each Central Power Hub is configured via its network connections using an intuitive browser-based application. This secure, pass-
word protected application is accessible by any authorized admin user, located anywhere.
4.1.1 TO ACCESS THE MANAGEMENT APPLICATION
1 Use a computer that is directly or indirectly (i.e. via a network switch) connected to the Central Power Hub unit. If you need to
make a temporary connection, see below.
2 Run a web browser on your computer and enter the IP address of the Central Power Hub. The default IP address setting is:
192.168.1.22
3 If requested, enter your username and password to log on.
Note: The default username
and password are 'admin'
and 'password' respective-
ly.
The opening page of the
management application
should be displayed:
4.1.2 TO TEMPORARILY CONNECT A COMPUTER TO THE
NETWORK PORT
1 If you need to make a temporary connection for configuration purposes, use
a standard patch cable (cross-over or straight connections are both support-
ed) to link the Ethernet 10/100 network port (
main chassis to your computer.
) on the front panel of the
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Patch cable link
to your computer
13