Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Black Box Remote Power Manager 16
Summary of Contents for Black Box Remote Power Manager 16
- Page 1 © Copyright 2005. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
- Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
-
Page 4: Federal Communications Commission
REMOTE POWER MANAGER QUICK START GUIDE FEDERAL COMMUNICATIONS COMMISSION INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is... -
Page 5: Instrucciones De Seguridad
REMOTE POWER MANAGER QUICK START GUIDE NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. - Page 6 REMOTE POWER MANAGER QUICK START GUIDE 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
-
Page 7: Trademarks Used In This Manual
REMOTE POWER MANAGER QUICK START GUIDE TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc. AT is a registered trademark of International Business Machines Corporation. JavaScript is a registered trademark of Sun Microsystems, Inc. -
Page 8: Warnings And Cautions
Disconnect Power If any of the following events occurs, immediately disconnect the unit from the outlet and contact Black Box at 724-746-5500. 1. The power cord is frayed or damaged. 2. Liquid has been spilled into the device or the device has been exposed to rain or water. - Page 9 115-VAC power inlet and five 115-VAC NEMA 5-15R outlets. The second version (PS565AE) has a 105- to 240-VAC power inlet and five 230-VAC IEC 320-C13 outlets. The PS567A Remote Power Manager 16 uses two 115-VAC power inlets and 16 115-VAC NEMA 5-15R outlets. The PS584A Remote Power Manager 16 uses two 105- to 240-VAC power inlets and 16 230-VAC IEC 320-C13 outlets.
- Page 10 REMOTE POWER MANAGER QUICK START GUIDE ➀ Manual switch button: A control button for the Remote Power Manager’s switched plugs. To manually switch the plugs “On” or “Off,” press and hold the button for one second. NOTE Section 5.3.1 in the user’s manual describes how to disable the manual switch button.
- Page 11 ➈ Figure 2. The Remote Power Manager 16’s components (PS567A). ➀ Manual switch button: A control button for the Remote Power Manager 16’s switched plugs. To manually switch the plugs “On” or “Off,” press and hold the button for one second.
- Page 12 Also includes a 115-VAC, 15-amp (for PS567A) or 240-VAC, 10-amp (for PS584A) circuit breaker. ➉ Rackmounting brackets (not shown): These brackets are used for mounting the Remote Power Manager 16 in your equipment rack. Hardware Installation 1. Connect the power cable(s) (included) to the Remote Power Manager’s power inlet(s).
- Page 13 REMOTE POWER MANAGER QUICK START GUIDE NOTE For the PS567A or PS584A, if you will only be using plugs 1 through 8, then you just need to connect Circuit A to your power supply. Likewise, if you will only be using plugs 9 through 16, then you just need to connect Circuit B to your power supply.
- Page 14 REMOTE POWER MANAGER QUICK START GUIDE Communicating with the Remote Power Manager The Remote Power Manager offers two different user interfaces: a Web-browser interface and a text interface. The Web-browser interface allows you to contact the Remote Power Manager via a TCP/IP network using a standard JavaScript ®...
- Page 15 REMOTE POWER MANAGER QUICK START GUIDE Figure 4. Plug Status screen—Web-browser interface for PS567A and PS584A. b) From the text interface: i. Via Telnet™: Start your Telnet program, then Telnet to the Remote Power Manager’s default IP address (192.168.168.168). The Remote Power Manager’s Plug Status screen (Figures 5 or 6, depending on the model) appears.
- Page 16 NOTE The default communications parameters for the console port are 9600 bps, no parity, 8 data bits, and 1 stop bit. Remote Power Manager v1.10 Site ID: Black Box — Lawrence, PA Plug | Name | Password | Status | Boot/Seq.
- Page 17 REMOTE POWER MANAGER QUICK START GUIDE 2. Perform the following tests to make sure that the Remote Power Manager is responding to commands: a) Reboot outlet: If you are communicating with the Remote Power Manager via the Web-browser interface, select the button in the “Boot” column for plug 1, then click Apply.
- Page 18 NOTES...
- Page 19 NOTES...