Philips Lumea BRI861 Manual page 30

30
English
Pulse interval
Setting 1
Setting 2
Setting 3
Setting 4
Setting 5
Troubleshooting
Problem
The
device/adapter
becomes warm
during use.
When I place the
device on the
skin, it does not
release a flash.
The 'ready to
flash' light blinks
orange.
Min 2.9 Second
The minimal time
between flashes
1.3s
1.7s
2.3s
2.6s
2.9s
This chapter summarizes the most common
problems you could encounter with the device. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
This is normal.
Your skin tone in
the area to be
treated is too dark.
Maximum output of
radiation
5.76 +/- 1.28 J
7.68 +/- 1.28 J
10.24 +/- 1.28 J
11.52 +/- 1.28 J
12.8 +/- 1.28 J
Solution
No action required.
Treat other body areas
with lighter skin tones with
Lumea.