Table of Contents
Advertisement
3. I
(
'
NSTALLATION
CONT
3.7 I
D
E
NSTALLING
UAL
3.7.3 C
T
ONNECTING
Using a jig saw, cut a 6" diameter hole in the exterior wall and slide the single
end of the Tandem transition in it.
The Tandem transition must be inserted in such a way that the
exhaust air to outside duct will be located on top.
Join the end of the Tandem transition to the rear of the exterior backplate.
Secure with 2 Xmas tree pins and seal properly with duct tape.
The exterior backplate must be installed with the word "TOP''
pointing upward.
Lean the exterior backplate to the exterior wall. Using 4 no. 8 x 1½" screws, fix
it to the wall. Seal the outline with caulking.
Snap the assembled exterior hood on its backplate and secure with 2 provided
screws (no. 8 x 3/4").
)
D
H
(
'
)
XTERIOR
OOD
CONT
D
T
D
E
ANDEM
RANSITION TO
UAL
CAUTION
CAUTION
H
XTERIOR
OOD
12
E
XHAUST AIR TO OUTSIDE
DUCT ON TOP
VD0084
X
MAS TREE PIN
VD0085
VD0086
S
VD0087
CREW
Advertisement
Table of Contents
