Furuno FMD-3300 Operator's Manual page 11

TT/AIS Operations
How to find target info
Click a target to show its information.
Title bar
TT Info (1/2)
TT No.
Bearing
Range
Course over ground
Speed over ground
CPA
TCPA
Bow crossing range
Bow crossing time
How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box
Shows or hides TT symbols.
Sets past position
point interval (time).
True-G
Setting cannot be changed
from this equipment.
(ex. AIS)
Scroll buttons
TT symbols (main)
Symbol
Name
(Color)
Course over ground
Past position
Speed over ground
point
(Green)
Target under
Bow crossing range
Bow crossing time
acquisition
(Green)
Acquired
target
(Green)
Set association method.
11 11 11
Title bar AIS Info (1/2)
MMSI
Vessel name
Bearing
Range
CPA
NAV status:
TCPA
Underway
using
engine
Position
Shows or hides AIS symbols.
Sets vector time
(shared AIS/TT).
No use.
Selected TT data source.
Checked when the antenna that displays radar
echoes automatically feeds TT data.
Note: For systems which have the optional RADAR function, this section of the TT/AIS
.
page appears blank
Click to switch level of detail
Scroll buttons
AIS symbols (main)
Symbol
Heading
(Color)
Past position
Rate of
turn point
(Green)
Navigation
Sleeping AIS
status
target
(Green)
Activated AIS
ABC
(Green,
target
thick line)
Sets vector mode
(shared AIS/TT).
[ CCRP/ANT ] button (available only when an
antenna not compliant with IEC 62388 Ed.2 is
connected.)
Selects the reference position (CCRP or ANT)
for use in the TTM sentence.
Name
Vector
(ex. TT)