Table of Contents
Advertisement
AXIS Q3709-PVE Network Camera
Events
•
Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 22.
•
PTZ Control
-
Preset Position – Go to a preset position.
•
Record Video – Record video to a selected storage.
•
Send Images – Send images to a recipient.
•
Send Notification – Send a notification message to a recipient.
•
Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured
under System Options > Network > SNMP.
•
Send Video Clip – Send a video clip to a recipient.
•
Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see Recipient Types on page 35.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Recipient Types
The following recipients are available:
Recipient
Email
FTP
Use with action
Send Images
Send Notification
Send Video Clip
Send Images
Send Video Clip
Notes
An email recipient can contain multiple email addresses.
35
Advertisement
Table of Contents
