Table of Contents
Advertisement
INSTALLATION
INSTALLATION FOR COMPACT OVEN
Ventilation openings
behind, min. 250cm
min
100
Back
panels
open
min.
850
570
Microwave oven must be
installed minimum height
850mm above the ground
Building in
•
Do not hold or carry the appliance by the door
handle. The door handle cannot hold the weight of
the appliance and may break off.
1.
Carefully push the microwave into the box,
making sure that it is in the centre.
2.
Open the door and fasten the microwave with
the screws that were supplied.
•
Fully insert the appliance and centre it.
•
Do not kink the connecting cable.
•
Screw the appliance into place.
•
The gap between the worktop and the appliance
must not be closed by additional battens.
Flush fit top view
2
600
560
+8
Cupboard
door
Infill panels are recessed 20mm from the external
cabinet door to accommodate flush fit
466
560
+8
448
568
Ventilation area in the base min. 250cm
infill panel
350mm max. length
20mm
Cupboard
600mm
door
552
458
595
2
IMPORTANT
Electrical connection
This appliance is supplied with a 15A power cord without
plug. It must be installed by a suitably qualified electrician
in compliance with local regulations and wiring rules. An
accessible all pole isolation switch with contact gap of at
least 3mm must be supplied in installation wiring.
20
Min 3.5mm
ventilation gap
below trim
6mm packer
Please note packer must be
set back 20mm from front trim
to avoid obstruction of front
vent. Packer must be secured
to base of cabinet.
Ventilation grid
Cupboard feet
33
min 100
Advertisement
Table of Contents
