Acquaer SJC100-1 Owner's Manual page 6

  5 .   U sing PVC purple primer and PVC cement, attach a1-1/4 in.
PVC elbow (not included) onto the rigid PVCpipe extending
from the well seal.
  6 .   W rap thread tape around the threads of a male PVC adaptor
(not included). Thread the adaptor into the front of the
pump (A).
  7 .
  U sing PVC purple primer and PVC cement, attach as many
sections of rigid PVC pipe and couplings (not included) as
needed to connect the male PVC adaptor to the PVC elbow.
  E nsure the pipe slopes slightly toward the well (to prevent
air trapping in the pipe).
  8 .   W rap thread tape (not included) around threads of a 1 in.
discharge tee (not included). Using a pipe wrench, thread
the 1 in. discharge tee into top of the pump.
  9 .   W rap thread tape (not included) around the threads of a 1 in.
male PVC adaptor (not included), and thread the adaptor
into the discharge tee.
6
5
6
7
8
9