Tripp Lite UPB-05K2-1U Owner's Manual page 4

Mobile Power Bank Charging
Notes:
• A button is located on the Mobile Power Bank next to the USB Micro-B input port.
When the button is pressed once, the LED indicators will illuminate to show how
much battery capacity is left. When pressed and held for 3-4 seconds, the button
turns the built-in LED flashlight on/off.
• When charging the Mobile Power Bank, its LED indicators will illuminate in one of
five combinations to indicate the following battery capacity levels:
• 95-100% Capacity – 4 LEDs illuminate solid
• 75-95% Capacity – 3 LEDs illuminate solid, with the 4th LED flashing
• 50-75% Capacity – 2 LEDs illuminate solid, with the 3rd LED flashing
• 25-50% Capacity – 1 LED illuminates solid, with the 2nd LED flashing
• 0-25% Capacity – 1 LED (first) flashing
• If the LED(s) continue to illuminate solid when initially connecting the charging
cable, disconnect and reconnect until the LED(s) begin blinking.
1. Using the included USB Micro-B cable, connect the Micro-B port located
on the Mobile Power Bank to the USB-A port on a computer or USB
Charger.
2. The Mobile Power Bank will begin charging with the LED indicator light(s)
illuminating according to the combinations listed above.
18-11-207-933469-EN.indd 4
4
11/30/2018 8:59:43 AM