Download Print this page

Elo Touch Solutions ET1502LM User Manual page 26

Advertisement

Safety Signs and Symbols Description
This symbol alerts the user that important literature concerning
the operation and maintenance of this unit has been included.
Therefore, it should be read carefully to avoid any problems.
DC Input.
IEC 60417-5032 : Alternating Current.
Stand by.
Accessory equipment connected to the analog and digital interfaces must comply with the respective nationally harmonized IEC standards (i.e., IEC
60950 for data-processing equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for medical electrical
equipment.) Furthermore, all configurations shall comply with system standard IEC 60601-1 clause 16. Everybody who connects additional equipment to
the signal input part or signal output part configures a medical system, and is, therefore, responsible for the compliance of the system with the
requirements of system standard IEC 60601-1 clause 16. If in doubt, consult the technical services department or your local representative.
Note and Warning
The monitor should be positioned close to a power outlet that is easily accessible.
Check that the voltage of the power source matches the power rating of the device before use.
Please do not touch the patient and this monitor at the same time.
Make sure the user does not contact SIP/SOPs and the patient at the same time.
The monitor shall not be used for diagnostic purposes, or for life-supporting systems.
"CAUTION – Use suitable mounting apparatus to avoid risk of injury."
Use a power cord that matches the voltage of the power outlet that has been approved and complies with the safety standard of your particular
country.
"WARNING – Do not modify this equipment without authorization of the manufacturer."
"WARNING – To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth."
If using any expansion card or accessories, define the loading and usage method.
Disconnect the AC power cord to fully power off the device.
User Manual ET1502LM
26

Advertisement

loading