Acer L811 EL8630Ua Series User Manual page 30

20
Setting
•
HDR
•
Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
•
Startup Screen
•
The function is to configure the geometric distortion of the
projector's images when the images are projected onto
screens which have a kind of uneven surface such as a
cylinder, a spherical shape, etc.
Warping
Enable
Keystone and corner correction functions will not be
available when Warping is enabled.
Control Channel
Allows you to select a preferred control method for warping
adjustment.
Warping Correction
This function is available when On is selected in the Warping
> Enable menu and OSD is selected in the Warping > Control
Channel menu.
•
Source Selection
•
The default value is "On". The up/down move of your
Auto Screen
electronic screen relates to power on/off of the projector.
HDR: The projector supports HDR imaging sources. It can
automatically detect the dynamic range of the source,
and optimize settings to reproduce contents under wide
range of light conditions. If the input source is not
defined with dynamic range, you can also manually
select SDR for it.
EOTF: This function helps provide better image quality
with options from low, middle to high.
Acer: The default startup screen of your Acer projector.
User: Use the picture you transfer to the projector. See
"Acer Splash Downloader" for how to transfer the
picture.
Note: Some of the following OSD settings may not be
available. Please refer to the actual OSD of your
projector.
Manual: When switching input signals, you need to press
"SOURCE" on the control panel or remote control, or
the direct source key on the remote control.
Auto: The projector will detect your source
automatically.