Technical Data; Definitions: Safety Guidelines - DeWalt DCH263N Manual

HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL
DCH263
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
No-load Impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/concrete
Maximum core drilling capacity in soft brick
Chuck
Collar diameter
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
Hammerdrill mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chisel mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a =
h, HD
Uncertainty K =
Chiselling
Vibration emission value a =
h ,Cheq
Uncertainty K =
Drilling into metal
Vibration emission value a =
h , D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WALT one of the
e
DCH263
V 18
DC
1
Li-Ion
min 0–1165
-1
bpm 0–4300
J 3.0
mm 13/30/28
mm 65
EC-Declaration of Conformity
SDS PLUS
Machinery Directive
mm 54
kg 2.7
Heavy-Duty Cordless Rotary Hammerdrill
DCH263
dB(A) 86
WALT declares that these products described under
D
e
dB(A) 97
Technical Data are in compliance with:
dB(A) 3
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
dB(A) 89 2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
dB(A) 100
The undersigned is responsible for compilation of the technical
dB(A) 3
file and makes this declaration on behalf of D
m/s² 9.1
m/s² 1.5
Markus Rompel
Vice-President Engineering, PTE-Europe
m/s² 7.7
WALT, Richard-Klinger-Straße 11,
D
e
m/s² 1.5
D-65510, Idstein, Germany
07.01.2019
m/s² <2.5
m/s² 1.5

Definitions: Safety Guidelines

m/s² <2.5
m/s² 1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
English
WALT at
e
WALT.
e
3