Frigidaire Gallery FGAC5044W10 Use & Care Manual page 8

Operating Instructions
Operating Instructions
(continued)
8. The TIMER function enables you to either Delay Start or Delay Stop the unit in the choice from 0.5 hour to 24 hours.
If the unit is running, then selecting Timer will turn the unit off in the hours that will be set (Delay Stop). If the unit is
off, then selecting Timer will turn the unit on in the hours that will be set (Delay Start).
TIMER setting: First press TIMER button, then adjust timer setting, by tapping or holding the " - " or " + " button to
change the delay timer at 0.5 hour increments, up to 10 hours, then by 1 hour increments up to 24 hours. The
control will count down the time remaining (8,7.5,7, etc.) until the unit either starts or stops. For the Delay Start, the
fan speed and humidity maintained will be the same as previous setting. After TIMER setting finishes, pressing TIMER
button again at any time will stop the TIMER function. The Delay Start/Stop Feature will work until the unit either
starts or stops. Once that happens the above steps have to be repeated.
NOTE:
1. Before entering TIMER setting, make sure power is being supplied to the unit.
2. Before entering TIMER setting, select a desired setting for operation when the unit turn on.
9. Press and hold the " - " and " + " for 3 sec can activate or deactvate the LOCK function. The display will show LC for 5 secs.
The control panel will be lock and the setting can not be changed.
10. The unit is equipped with a device called an ionizer. This device can only be activated and deactivated via the Frigidaire
app, which can be downloaded onto your smart phone device. By activating this device, it will ionize air molecules.
11. To shut the unit down, press the ON/OFF button.
Note: After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
8 2019 Electrolux Home Products, Inc. All rights reserved.