Table of Contents
Advertisement
en operation
Use a soft brush to clean the heat
4.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Clean the filter mat thoroughly un-
5.
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
28
Push the filter mat onto the retain-
6.
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note: You can order the filter mat
→ Page 23 as a spare part from
customer service.
Close the base unit → Page 33.
7.
12.12 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation:
.
Advertisement
Table of Contents
