Table of Contents
Advertisement
12.4 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 24
Press
.
▶
a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: "End" .
12.5 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 19
Press
.
1.
The activated "Ready in" time is
paused.
Press
repeatedly until the dis-
2.
play indicates the desired "Ready
in" time.
Press
.
3.
The changed "Ready in" time is ac-
tivated.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement: A programme has
started.
→ "Starting the programme",
Page 25
Press
.
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
12.7 Cancelling the pro-
gramme
Press
.
1.
Open the appliance door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 25
12.8 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.9 Switching off the appli-
ance
Turn the programme selector to
▶
Off .
12.10 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation:
Open the door.
1.
operation en
.
25
Advertisement
Table of Contents
