Table of Contents
Advertisement
en Troubleshooting
Fault
Water is leaking from
the appliance.
The laundry is too
damp.
38
Cause and troubleshooting
The lever for the heat exchanger cover is not closed
correctly.
Ensure that the lever for the heat exchanger cover
▶
is closed correctly.
→ "Closing the base unit", Page 33
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 21
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 21.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 20.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 20.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 21
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 33.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 28.
1.
→ "Inserting the condensation container", Page 29.
2.
→ "Starting the programme", Page 25.
3.
Advertisement
Table of Contents
