Other Operations; Programmed Playback; Deleting Programmed List; Displaying File Information - LG CM4640 Owner's Manual

Hide thumbs Also See for CM4640:
Table of Contents

Advertisement

18
Operating

Other Operations

Programmed Playback

The program function enables you to store your
favorite files from any disc or USB device.
A program can contain 20 tracks/files for each
media (CD, USB1,USB2). Possible to save a total of
60 tracks/files.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Press C/V on the remote control to select
a track/file.
3
3. Press PROGRAM/MEMORY to save and select a
next track/file.
4. Repeat steps 2-3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER W/S to select the program
number.)
5. Press PROGRAM/MEMORY once again.
To play the programmed list, press d/M after you
make the list.
,
Nota
When making or modifying the programmed
list, REPEAT mode is off.

Deleting Programmed list

Deleting function is worked only on the edit mode.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Select a song by pressing PROGRAM/MEMORY
or PRESET.FOLDER W/S repeatedly.
3. Press DELETE while a song is selected.
,
Note
y Programmed list is cleared in the case
below.
- Removing the disc or the USB device.
- Deleting or recording music files in the
USB device.
y Program is switched off in the case below.
- Changing the function to the others.
- Turning off and on the unit.
- Operating the numeric buttons on the
remote control.

Displaying file information

While playing an MP3 file containing file
information, you can display the information by
pressing INFO.

Searching for a folder

1. Press PRESET·FOLDER W/S on the remote
control repeatedly until a desired folder appears
in the display window.
2. Press d/M to play it. The first file of the folder
will be played.

Deleting an MP3/WMA file

You can delete a file, folder or format by pressing
DELETE. (USB only)
1. Press DELETE repeatedly while selecting the
MP3/WMA file. This function is supported
only in stop status. The display changes in the
following order.
- DEL FILE : Deletes file.
- DEL DIR : Deletes folder.
- FORMAT : Formats USB.
2. To delete file/folder or format, press d/M
on the remote control or T on the unit.
3. If you want to exit the current mode,
press Z ENTER on the remote control or
press I on the unit.
>
Caution
y Do not extract the USB device during
operation.(play, delete, etc.)
y Regular back up is recommended to
prevent data loss.
y The delete function may not be supported
according to the USB status.

Advertisement

Table of Contents
loading

Table of Contents