Other Operations; Turn Off The Sound Temporarily; Childsafe Mode; Demo - LG OK99M Owner's Manual

34 Operating

Other Operations

Turn off the sound temporarily

Press [ on the remote control to mute your sound.
You can mute your unit, for example, to answer
the telephone, the "Q" will appear in the display
window.
To cancel it, press [ on the remote control again or
change the volume level.

CHILDSAFE Mode

This function helps to prevent you from being
3
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is "MIN" .
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is "MIN" and
this mode is turned on.
,
Note
In case of USB or BLUETOOTH function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.

DEMO

In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions with demo sound in the display
window.
To cancel the DEMO function, press USB REC /
DEMO on the unit once more.

Resume stop

The unit records the point where you pressed Z
depending on the USB.
If you press Z twice, the unit will clear the stopped
point.

Using Microphone

1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by rotating MIC VOLUME
clockwise or counterclockwise on the unit.
,
Note
y When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
y If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the MIC VOLUME on the unit.
y If sound through the microphone is extremely
loud, it may be distorted. In this case, rotate
MIC VOLUME on the unit.
y You can give an echo effect to the sound
from the microphones by pressing MIC
ECHO.