Using The Twist Lock Blending Arm - KitchenAid KHBC210 Instructions Manual

OPERATING THE COMMERCIAL IMMERSION BLENDER

Using the twist lock blending arm

1. Insert Blending Arm attachment into
motor body with the alignment mark
facing the back of the unit, and twist
to lock. The alignment mark on the
attachment should line up with the
mark on the body.
2. Plug the electrical cord into an electrical
wall socket.
3. Set Commercial Immersion Blender to
Low or High
4. Insert the Commercial Immersion
Blender into the mixture.
NOTE: The Commercial Immersion
Blender should only be immersed in
liquids the length of the attachment. Do
not submerge beyond the seam of the
blending attachment. Do not immerse
the motor body into liquids or other
mixtures. To avoid damaging blades or
mixing container, do not touch the blade
to the bottom of the mixing container
or use in a mixing container that has
protruding parts that can go under the
metal guard.
5. Press the Lock Switch to unlock
6. Press the Power button to activate
7. When blending is complete, release
8. Unplug immediately after use, before
For best results, insert Commercial
Immersion Blender with Blending Arm
attached into the pot or bowl containing
ingredients at an angle. Use your free
hand to hold the pot or bowl or hold the
Commercial Immersion Blender near the
base of the motor unit for better stability.
Remember to stop the Commercial
Immersion Blender before removing it
from the pot or bowl to avoid splashing.
speed.
Commercial Immersion Blender.
the Commercial Immersion Blender.
the power button before removing
Commercial Immersion Blender from
the mixture.
removing or changing attachments.
Blending
Rest the Commercial Immersion Blender on
the bottom of the pot or bowl momentarily
then hold at an angle and slowly draw it
upwards against the side of the pot or bowl.
As the Commercial Immersion Blender is
drawn up you will notice the ingredients
from the bottom of the pot or bowl being
drawn up. When the ingredients are no
longer being drawn up from the bottom,
return the Commercial Immersion Blender
to the bottom of the pot or bowl and
repeat the process until the ingredients are
at the desired consistency.
Drawing up
9