D-Link DCS-7517 User Manual page 67

Section 3: Configuration
Authentication Enter the type of authentication used by your read-only SNMP server.
Type:
Authentication Enter the authentication password used for your read-only SNMP server.
Password:
Encryption Enter the encryption password used for your read-only SNMP server.
Password:
Traps: Enable SNMP traps support of the camera.
Trap address: Enter IP address of SNMP server where the trap message will be sent.
Trap Enter a name for trap community.
community:
Trap address 2: Enter IP address of SNMP server where the trap message will be sent.
Trap Enter a name for trap community.
community 2:
D-Link DCS-7517 User Manual 67