D-Link DCS-7517 User Manual page 55

Section 3: Configuration
Event
Create and schedule up to three events with their own settings here. After making any changes, click the Save button to save
your changes.
Event name: Enter a name for the event.
Enable this Toggle this to activate this event.
event:
Priority: Set the priority for this event. Events with higher priority will be executed
first.
Delay for...:
Specify the delay time before allowing this event to be triggered again. This
is used for both motion detection events and digital input triggers.
Trigger:
Specify the input type that triggers the event.
Video Motion
Selecting this will trigger the event when motion is detected during live
Detection:
video monitoring. Make sure you have enabled motion detection and
specified what part of the image to monitor for motion. For more details,
refer to Motion on page 61.
Periodic:
Selecting this will trigger the event in specified intervals. The trigger interval
unit is in minutes.
Digital Input:
Selecting this will trigger an event when a signal is detected on the digital
input of the DI/DO port.
System Boot:
Selecting this will trigger an event when the system boots up.
Network Lost:
Selecting this will trigger an event when the camera's connection to the
network is lost.
Face Detection:
Selecting this will trigger an event when a face is detected. For more details,
refer to Face on page 62
D-Link DCS-7517 User Manual 55