Part
Drum Removal
sensor
(Thermistor,
Thermostat)
Removal
18 _ Disassembly and Reassembly
figure
1. Disconnect the Power Supply to the unit.
2. Remove the Panel Control, the Main PCB, the
3. Remove Belt.
4. Remove the Drum.
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB, the
3. Remove 2 Housing Sensor.
4. Remove the Sensor.
Description
Cover Top, the Frame Front and the Drum Front.
When reassemble the belt, make it located
middle of the Drum.
Cover Top, the Frame Front, the Drum Front and
the Drum.
Do not apply excessive force to the terminal.