Part
main PCb Removal
Top Cover Removal
figure
1. Remove the Panel Control.
2. Separate 4 Hook From the Guide PCB.
3. Remove the Housings.
4. Remove 1 Screw from the Top Cover.
1. Disconnect the power supply to the unit.
2. Remove the Panel Control and the Main PCB.
3. Remove the Cap-Cover Top and 2 screws from the
4. Slide the Top Cover towards the front and lift from
Description
Bracket Cover Top.
the unit.
Scratch and impact to the top cover is
prohibited.
Disassembly and Reassembly _ 11