Table of Contents
Advertisement
en Basic operation
13.8 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press Start / Reload
1.
The activated "Ready in" time is
paused.
Press Finished in
2.
until the display indicates the de-
sired "Ready in" time.
Press Start / Reload
3.
The changed "Ready in" time is ac-
tivated.
13.9 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start / Re-
.
load
To resume the programme, after
3.
the desired soaking time, press
Start / Reload
13.10 Adding laundry
Press Start / Reload
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
30
.
repeatedly
.
.
.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start / Reload
5.
13.11 Cancelling the pro-
gramme
Press Start / Reload
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse programme.
– If the water level is high, start
the Spin
a suitable programme for drain-
ing.
→ "Programmes", Page 23
Remove the laundry → Page 30.
3.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Start the Spin
1.
lect a suitable programme for
draining.
→ "Programmes", Page 23
Press Start / Reload
2.
13.13 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switching off the appli-
ance
Turn the programme selector to
1.
Off.
Turn off the tap.
2.
.
.
programme or select
programme or se-
.
Advertisement
Table of Contents
