Table of Contents
Advertisement
en Cleaning and servicing
Insert the drain hose into the
9.
holder.
Cleaning the drain pump
Requirement: The drain pump is
empty. → Page 33
Since water may remain in the
1.
drain pump, unscrew the pump
cap carefully.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Ensure that the impeller in the
3.
drain pump can rotate.
Insert the pump cap.
4.
34
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Insert and close the service flap.
6.
2
1
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Drain
gramme after you have emptied the
drain pump.
Turn on the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 23
pro-
Advertisement
Table of Contents
