Starting The Programme; Changing The Activated "Ready In" Time; Soaking Laundry; Adding Laundry - Bosch WIW24306ES User Manual And Installation Instructions

Table of Contents

Advertisement

en operation
13.8 Starting the programme
Requirement: A programme has
been set.
→ "Setting a programme", Page 32
Press Inicio/Pausa + Carga.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.The display shows either the
programme duration or the "Ready
in" time.
a After the programme has ended,
the display shows: End.
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 32
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 27
Press Inicio/Pausa + Carga.
1.
The activated "Ready in" time is
paused.
Press Termin. 
2.
the display indicates the desired
"Ready in" time.
Press Inicio/Pausa + Carga.
3.
The changed "Ready in" time is ac-
tivated.
34
repeatedly until
13.10 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Inicio/
Pausa + Carga.
To resume the programme, after
3.
the desired soaking time, press
Inicio/Pausa + Carga.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement: A programme has
started.
→ "Starting the programme",
Page 34
Press Inicio/Pausa + Carga.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 26
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Inicio/Pausa + Carga.
5.
13.12 Cancelling the pro-
gramme
Press Inicio/Pausa + Carga.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.

Advertisement

Table of Contents
loading

Table of Contents