Inserting The Measuring Aid For Liquid Detergent; Adding Detergent And Care Product; Starting The Programme; Changing The Activated "Ready In" Time - Bosch WAN28206GR User Manual And Installation Instructions

Table of Contents

Advertisement

13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
Insert the detergent drawer.
4.
13.6 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 28.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press Έναρξη / Προσθήκη
ρούχων.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: "End".
13.8 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press Έναρξη / Προσθήκη
1.
ρούχων.
The activated "Ready in" time is
paused.
Press Λήξη σε repeatedly until the
2.
display indicates the desired
"Ready in" time.
Press Έναρξη / Προσθήκη
3.
ρούχων.
The changed "Ready in" time is ac-
tivated.
operation en
29

Advertisement

Table of Contents
loading

Table of Contents