ASROCK IMB-154B User Manual page 15

Backlight Power Select
(LCD_BLT_VCC)
(5-pin BKT_PWR1)
(see p.8 No. 31)
Backlight Control Level (CON_LBKLT_CTL)
(3-pin BLT_PWM1)
(see p.8, No. 10)
COM Port PWR Setting Jumpers
(5-pin PWR_COM1, for COM Port1)
(see p.8, No. 1)
(3-pin PWR_COM2, for COM Port2)
(3-pin PWR_COM3, for COM Port3)
(see p.8, No. 1)
(3-pin PWR_COM4, for COM Port4)
(3-pin PWR_COM5, for COM Port5)
(3-pin PWR_COM6, for COM Port6)
(see p.8, No. 14)
mSATA Select
(2-pin mSATA_SEL1)
(see p.8, No. 35)
USB2 Power Setting Jumpers
(for USB2_0_1)
(3-pin USB_PWR_H1)
(see p.8, No. 26)
(for USB2_2_3)
(3-pin USB_PWR_H2)
(see p.8, No. 3)
Use this to set up the backlight
power of the LVDS connector
and the panel backlight power
of BLT_PWM1.
1-2: LCD_BLT_VCC: +5V
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC_IN
1-2: +3V Level
2-3: +5V Level
1-2: +5V
2-3: +12V
3-4: +12V
4-5: +5VSB
1-2: +5V
2-3: +12V
1-2: +5V
2-3: +12V
Open: For SATA3_2
Close: For mSATA
1-2: +5V
2-3: +5VSB
1-2: +5V
2-3: +5VSB
3 2 1
15