Samsung POWERbot VR A72 Series User Manual page 33

Symptom
The Edge Clean Master function does
not work.
The Edge Clean Master function works
though there is no wall or corner.
The Edge clean master function
works though the POWERbot has not
approached a wall or corner.
SmartThings App cannot be installed.
A message of product registration
failure appears.
During product registration,
recharging button is pressed and
held as instructed but the next step
does not appear.
During product registration, the
wireless router I want to connect
cannot be searched.
1_VR7200_EN_DJ68-00827B-03_AA.indd 33
fWhen POWERbot cannot recognize the wall, the Edge clean
master may not work.
– When an obstacle made of reflective material is in front
of the wall
– When the wall itself is made of reflective material
– When the wall is a dark color
fCheck whether small obstacles are arranged in a narrow
space.
fWhen the POWERbot recognizes the front obstacle as a
wall, Edge clean master function may work.
fWhen the degree of the angle of a corner which the
POWERbot detects is large, the Edge clean master function
may work without approaching the wall or corner.
fSmartThings App operates on Android OS 6.0 or later, iOS
10 or later.
fThe supporting OS version for SmartThings App may
change later.
fFor rooted smart devices, standard installation and use will
not be guaranteed.
fTry the product registration procedure again by referring to
the pop-up messages.
fPlease refer to the "Setting up the wireless router" in the
user manual.
fPlease refer to the steps for completing the product
registration in the user manual section "Adding a device to
the SmartThings APP".
fWhen the product registration fails repeatedly, reset the
POWERbot and Smartphone, run the SmartThings App again
and try the product registration.
fThe same Samsung account should be used for the login of
App and product registration.
fAll users should use the Samsung account issued by the
same country.
fPress the recharging button until you hear it beep.
fIf the next step does not appear within several seconds,
press the recharging button one more time.
fCancel the product registration, run the SmartThings App
again, and try the product registration again.
ENGLISH-33
Checklist
2020-01-13 오전 1:13:32