Cleaning the brush and Auto shutter tool
Brush design may differ depending on the model. Do not clean the brush with water.
1
Remove the
brush cover
5
Reassemble the brush
Cleaning the Driving wheel
1
Put a soft cloth on the floor and place
POWERbot upside-down on the cloth.
1_VR7200_EN_DJ68-00827B-03_AA.indd 23
2
Remove the
brush
ENGLISH-23
Soft Action Brush
Combo Brush
3
Clean the
brush
Remove remaining
dirt on the soft action
brush with a wet tissue
or a dry cloth.
6
Reassemble the brush cover
For VR20R726*** models, check that the brush
cover is correct for the assembled brush.
2
Use a blunt rod or tweezers to remove
foreign matter.
4
Clean the auto
shutter tool
2020-01-13 오전 1:13:27