Samsung AM056FN2DEH Series Service Manual page 249

No Parts
6 Cushion Mid
Samsung Electronics
Procedure
1) As seen in the picture besides, pull out
the EPS structure located at the center of
exhaust air and supply air.
2) Pull out the EPS structure through the
inspection hole.
3) Assemble the product by adjusting it
with the direction, following the direction
carved on the surface of Cushion Mid.
Put the part written with Down↓ down-
wards and put the part with Motor→
towards the Motor when assembling the
unit.
Make sure not to break down EPS
structure.
Disassembly and Reassembly
Remark
249