Samsung AM056FN2DEH Series Service Manual page 178

Disassembly and Reassembly
No Parts
4 Control-Box
5 Bell-Mouth
178
Procedure
1) Disconnect the Connector Wire that is con-
nected to the indoor unit's PBA from the PBA.
2) Unscrew the 2 fixed screws on both sides of
the Control Box, and disassemble the Control
Box from the indoor unit. (Use +Screw Driver)
1) Unscrew the screw fixed on the Bell-Mouth.
(Use +Screw Driver)
2) Push the Bell-Mouth in the direction
opposite to where it's installed on the
Control-Box to remove it.
Remark
Samsung Electronics