Bush AG56TBX Instruction Manual page 39

Care and maintenance
Looking after your appliance
Do not clean the stainless steel parts while they
are still hot from cooking.
Do not leave vinegar, coffee, milk, salt, water,
lemon or tomato juice on the stainless steel for a
long time.
Removal of the oven door
Before cleaning the oven door glass, you must remove
the oven door, as shown below.
1. Open the oven door.
2. Open the saddle bracket (a) (with the aid of a
screwdriver) up to the end position.
a
3. Close the door until it almost reaches the fully closed
position and remove the door by pulling it towards you.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Maintenance
WARNING: The maintenance of this appliance
should be carried out by an authorised service
person or qualified technician only.
Changing the oven lamp
WARNING: Switch off the appliance and allow it to
cool before cleaning your appliance.
• Remove the glass lens, then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace
the bulb that you removed (230 V, 15-25 Watt, Type
E14).
• Replace the glass lens, and your oven is ready for
use.
• The product contains a light source of energy
efficiency class G.
• Light source can not be replaced by end user. After
sales service is needed.
• The included light source is not intended for use in
other applications.
Replaceable light source by a
professional
The lamp is designed specifically for use in
household cooking appliances. It is not suitable
for household room illumination.
Other controls
• Periodically check the gas connection pipe. If a
defect is found, inform the technical service to have
it changed.
• We recommend the gas connection components
are changed annually If a defect is found while
operating the control knobs of the appliance,
contact an authorised service provider.
Care and maintenance
39